TyreON Truck tools ostala oprema za montažu guma
Akersloot
Ako odlučite da kupite opremu po niskoj ceni, proverite da li komunicirate sa pravim prodavcem. Saznajte više o vlasniku opreme. Jedan od načina prevare je da se predstavi kao prava kompanija. U slučaju sumnje, obavestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Pre nego što odlučite da napravite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumeli prosečnu vrednost izabranog modela opreme. Ako je cena ponude koja vam se sviđa mnogo niža od sličnih ponuda, razmotrite je. Značajna razlika u ceni može ukazati na skrivene nedostatke ili pokušaj prodavca da izvrši prevaru.
Ne kupujte proizvode čija je cena suviše različita od prosečne cene slične opreme.
Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unapred. U slučaju sumnje, ne bojte se da pojasnite detalje, tražite dodatne fotografije i dokumente za opremu, proverite autentičnost dokumenata i postavjate pitanja.
Najčešća vrsta prevare. Nepošteni prodavci mogu zatražiti određenu količinu kapare da "rezervišu" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sakupiti veliki iznos i nestanu, i više se ne pojave.
- Prenos pretplate na karticu
- Nemojte plaćati unapred bez izdavanja dokumenata koji potvrđuju postupak prenosa novca, ako je vam tokom komunikacije prodavac postao sumnjičav.
- Prenos na račun "poverenika"
- Takav zahtev treba biti alarmantan, najverovatnije komunicirate sa prevarantom.
- Prenos na račun kompanije sa sličnim nazivom
- Budite oprezni, prevaranti se mogu sakriti iza poznatih kompanija, neznatno menjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
- Zamena sopstvenih podataka u fakturi stvarne kompanije
- Pre prenosa proverite da li su navedeni podaci tačni i da se odnose na navedenu kompaniju.
Kontakti prodavca
+31 6 537...
Prikaži
+31 6 53701658
+31 72 540...
Prikaži
+31 72 540 1002
Holandija 
Grčka, Chalkidiki
Ukrajina, Zhytomyr
Nemačka, Niederlangen
Nemačka, Niederlangen
Nemačka, Niederlangen
Nemačka, Niederlangen
Nemačka, Niederlangen
Holandija, Akersloot
Holandija, Akersloot
Holandija, Akersloot
Holandija, Akersloot
Holandija, Akersloot
Holandija, Akersloot
Holandija, Akersloot
Nemačka, Pullach
Holandija, Akersloot
Holandija, Akersloot
Holandija, Akersloot
Holandija, Akersloot
500 €
≈ 58.550 RSD
Litvanija, Jonava
Impact wrench TyreON 3260 Nm
Impact wrench TyreON 2180 Nm
Impact wrench TyreON 1450 Nm
The pneumatic impact wrench is indispensable when changing tires.Quality, reliability and safety are therefore a must. TyreON has a number of quality air tools in its range.
TyreON impact wrenches have been developed for heavier mounting and dismantling applications on wheel nuts and wheel bolts.
3 models available from stock
TyreON 3260 Nm-
1 Inch impact wrench with long anvil of 20 cm (8 Inch)
TyreON 2180 Nm-
1 Inch impact wrench with long anvil of 20 cm (8 Inch)
TyreON 1450 Nm-
3/4 Inch impact wrench with short anvil of 4 cm (1.5 Inch)
TyreON 3260 Nm 1 Inch impact wrench with long shaft
The TyreON 3260 Nm impact wrench with extended anvil offers a very high torque of 3260 Nm.
The airwrench with long stroke shaft is particularly suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, lorries, trailers, buses, agricultural vehicles and light construction equipment.
Straight version with loose breaking torque of 3260 Nm / 2400 ft lbs - truck tool with rocking dog pinless hammer impact mechanism.
The advantage of the rocking dog pinless hammer impact mechanism is that the shaft can be turned by hand in the rest position and this accelerates and facilitates the placement of the impact wrench on the nut.
Drive Square 1 "(Inch)
Anvil 20 cm - 8 Inch
Nut or bolt capacity 50 mm
3 position power controller, forward and reverse
No-load speed 3600 rpm
Torque working range 1300 to 2850 Nm
Air inlet 1/2 "NPT
Required hose size 1/2 "- 13 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 18.5 KG
With 2 sockets 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
TyreON 2180 Nm 1 Inch impact wrench with long shaft
The TyreON 2180 Nm impact wrench with extended anvil offers a very high torque of 2180 Nm.
The airwrench with long stroke shaft is particularly suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, lorries, trailers, buses, agricultural vehicles and light construction equipment.
Straight version with breakaway torque of 2180 Nm / 1600 ft lbs - truck tool with rocking dog pinless hammer impact mechanism
The advantage of the rocking dog pinless hammer percussion mechanism is that the shaft in the rest position is loose and can be turned by hand, which speeds up finding the correct position of the cap on the bolt or nut.
Drive Square 1 "(Inch)
Anvil 20 cm - 8 Inch
Nut or bolt 41 mm
3 position power controller, forward and reverse
No-load speed 4200 rpm
Torque working range 900 to 1850 Nm
Air inlet 1/2 "NPT
Required hose size 1/2 "- 13 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 14 KG
With 2 socktes 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
TyreON Automotive Equipment
1921 CZ Akersloot
The Netherlands (EU)
(T) pokazati kontakte
(E) pokazati kontakte
Our showroom is open from Monday to Friday from 9 a.m. to 5 p.m.
TyreON 1450 Nm 3/4 inch impact wrench with short shaft
The TyreON 1450 Nm impact wrench has a high torque of 1450 Nm.
The airwrench is suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, trucks, trailers, buses, light construction equipment and agricultural vehicles.
Straight version with breakaway torque of 1450 Nm / 1075 ft lbs - truck tools with twin hammer hammer mechanism
The twin hammer stroke mechanism gives a high energy per stroke. The energy is transmitted directly to the drive square for maximum power.
Drive square 3/4 "
Anvil 4 cm - 1.5 Inch
Nut or bolt capacity 32 mm
3 position power controller, forward and reverse
Idle speed 5300 rpm
Torque working range 600 to 1300 Nm
Air inlet 3/8 "NPT
Required hose size 3/8 "- 10 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 5.8 KG
With 2 sockets 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
Prices truck tools - Air impact wrenches
TyreON 3260 Nm
- € 495, - excl. VAT
1 "impact wrench with 20 cm long anvil
TyreON 2180 Nm
- € 395, - excl. VAT
1 "impact wrench with 20 cm long anvil
TyreON 1450 Nm
- € 195, - excl. VAT
3/4 "impact wrench 4 cm short anvil
Truck tools