2017 Abendschön Maschinenbau ostala oprema za plastiku

Preis: Contact us for price
Marke: Abendschön Maschinenbau
2017 Abendschön Maschinenbau
The system consists of
Ultrasonic cutting device
Conveyor unit
control cabinet
protective elements
Technical data
Connection values
Mains connection: 3PH/N/PE
Signal link: upstream system hardware link
Emergency stop 2 channel with cross-circuit detection
Downstream system hardware link
Emergency stop 2 channel with cross-circuit detection
Power supply: 230/400VAC 50Hz
Connected load: 30kW
Control voltage: 24VDC
Circuit diagram no.: 1116
Remote maintenance
Please refer to the circuit diagram for further information
Connecting the system
To power the system
3 x 230/400V 50 Hz with a center conductor and protective conductor are required. The operator is responsible for laying and connecting the supply line to the distribution network and the system
Dimensions of the system
Long: ca. 9060mm
Width: ca. 4000mm
Height: ca. 2900mm
Environmental conditions
The operation of the system is designed for use at an ambient temperature of greater than 0°C but a maximum of 40°C
It is important to avoid condensation forming on the system
7 Design and function of the machine
7.1 Functional description
The system is specially designed for integrating into a dough piece line as specified in the order. The system is programme-controlled
The functional sequences are automatically regulated and monitored by a control programme
and monitored by a control programme
The dough pieces are fed automatically
The dough pieces are cut into or through the centre of the cutting unit conveyor using ultrasonic cutting units
max. product dimensions lxwxh (mm)
Diameter: 75…100 mm
Height: 21…32 mm
max. output per machine
Unfortunately not clear from the documentation
Possibly included in tender documents (not available to me)
how the rolls are cut
horizontally or vertically and completely or partially
The cut is made horizontally
The cut can be made partially or completely according to the plant documentation (see also BA page 38)
Intended Use
The system is only intended for use in bakeries
It is specially designed for integration into the dough line defined in accordance with the order
The perfect and safe operation of the machine requires proper storage
installation and assembly as well as careful operation and maintenance
The cutting system is used exclusively for cutting pieces of dough
The cut is carried out using ultrasonic units into the previously defined dough pieces
Any other use is considered improper
Intended use requires signal connection to the dough line and machine loading with production ranges of the quality specified in the order
The system is designed to operate at an ambient temperature of greater than 0°C but a maximum of 40°C
Find more here
pokazati kontakte
Contact us at
pokazati kontakte