Nova TyreON TPH45T-3 Air hydraulic jack 45 Tons - Minimum height 12 cm - por hidraulična dizalica

The price is excluding VAT and delivery costs.
Capacity 50T Pneumatic jack
3-stage jack 45T - 20T - 10T
Lifting height 12 cm - 35 cm
Model Long chassis - Long bar
Weight - Total length 40 kg - 184 cm
Application Intensive commercial use
Delivery includes Extensions 40 + 40 + 20 mm
Hydraulic oil is filled

Long chassis - Long bar
Pneumatic jack for the safe lifting of trucks, trailers, company cars, buses, construction and industrial machines, agricultural vehicles and forklifts.
With the minimum height of 12 cm, any lifting point is accessible. Thanks to the lifting height of 35 cm, the low profile pneumatic floor jack is also suitable for vehicles with high axles.
CE approved: EN 12100:2010 Safety of Machinery + EN 1494:2000+A1:2008 Mobile or Moveable Jacks
Metal shrinks or expands due to temperature differences, a TyreON low profile pneumatic floor jack will not fail at extremely low or high temperatures.
The pneumatic jack has undergone load testing at -25 ° C to + 45 ° C, and static and dynamic off-center load safety tests have also been realized.
The handle can be locked in 3 positions; 45º-90º and 180º.
The lifting cylinders are chrome-plated internally and externally and are resistant to wear and corrosion.
In addition, each lifting cylinder is equipped with 2 industrial seal rings to prevent oil from escaping.
Stage 1
Stage 2
Stage 3
This pneumatic jack with 3 heavy pistons uses 8-12 Bar compressed air to lift loads up to 45,000 kg. Our low profile pneumatic floor jacks are easy to operate and have many safety options, such as a joystick with a dead man's control that also controls an evenly slowed fall.
TPH45T-3 Pneumatic jack - low profile pneumatic floor jack
Pneumatic jack - Functionality & Safety
Fast lifting -
Thanks to the pneumatic high pressure pump
Dead man's control
  -  
When the joystick is released, the extra low profile pneumatic floor jack switches off and comes to stop
Pressure relief valve
 - 
Prevents damage to the low profile pneumatic floor jack with an overloaded load
Evenly lowered load
- A pressure reducing valve ensures an evenly slowed down, even with heaviest load
Accelerated to the load
- System to bring the cylinders accelerated to the load and to lower fast without load
Solid chassis
- Made of thick sheet steel, ultimate protection of the pneumatic high pressure pump and other internal parts
Oil circulation -
If, for example, the jack pneumatic comes to lie on its side, no oil escapes
Fixed position and evenly loaded lifting
-
Non-return valves guarantee a fully fixed position with loads at all heights and a controlled uniform lifting speed under load
TPH45T-3 Air hydraulic jack 45 Tons - Minimum height 12 cm - portable (40 kg)