Nova TyreON TSC3000X2i makazasta auto dizalica

Capacity 3000 kg
Lifting height 213 cm (180 net)
Drive 2.2 kW Electric-hydraulic
Type Fully automatic - Heavy duty (800 kg own weight)
Platforms 154 - 180 cm
► CE Stop
► Parking at any height (lock function)
► Operation 1 lifting table possible
C/w Mounting anchors + rubber blocks
Voltage 400V or 230V

The lifting platforms are extendable, in combination with 3T capacity, this in floor scissor lift is suitable for very small cars and longer vehicles.
A good solution for lifting low sports and luxury cars and all space around the car is free.The extensions are limited for a safe and even load distribution.
Quality product
CE safety switch at 30 cm height (press the down button again to continue the descend)
Optical and acoustic signal when lowering
Precision manufactured using laser cutting and robotic welding.
The safe built-in scissor lifts from TyreON are intended for daily intensive professional use.
With the extendable tables, longer vehicles also fit on the built-in scissor lift.
The very well finished TyreON TSC3000X2i double short scissor lift has a long technical life due to the applied process techniques, the careful assembly and the use of first-class materials.
Double in floor scissor car lift - 3000 kg
Reliable safe in floor scissor car lift
24V all-in-one control console with push buttons
Automatically unlocked (air required)
With steel roller bearings and powder coated
The axles are fitted with grease nipples
Possibility to operate one lifting table
With a precise ground plan for recesses
The controller can be placed either left or right
1 year warranty on all parts - CE certified
TyreCARE: Long-term spare parts supply is guaranteed
This in floor scissor lift is mounted flat in the floor.
With the help of the installation manual and the drawing of the recesses, the car lift can be easily installed by yourself.
There is no connection between the lifting tables therefore the car lift has a free and wide passage both in the highest and in the lowest position. 
2.5 meters between the car lift and controller - Left or right
The control unit can be placed on the left or right.
The maximum distance between the controller and the car lift is 250 cm.
The space between the two lifting tables can be varied from 65 to 95 cm.
TyreON supplies a long hydraulic hose set as standard so the room between the tables can be doubled for other applications.
Fully automatic in floor scissor lift - For professional intensive use
Solid, scissors of heavy profiles, platforms and ramps made of thick steel
2 powerful hydraulic cylinders
The platforms are 154 cm long and extendable to 180 cm
A pressure relief valve prevents damage due too heavy loads
The descent speed and the upward force can be adjusted
Parking at any height (lock function)
Safety double in floor scissor car lift
Complies with European standards Machinery Directive 2006/42/EC - EN 1493:2010 Vehicle lifts
Hydraulic synchronized cylinders - both platforms move up and down simultaneously
Automatic mechanical double safety lock on every 3 cm
The safety locks are pneumatically opened by the down button on the panel
A height switch ensures that the motor stops automatically when the lift reaches the highest point
Electrical circuit on the scissorlift is 24 Volt
On-off main switch with indicator light on the panel
Aluminium motor with cooling fins and fan against overheating
Controller with a 16A automatic fuse
Procedure for lowering in the event of a power failure
Lock function - hose set - technical service life
With the lock button on the controller you can lower the carlift into the lock. The car can be parked at height for a long time while the lift rests mechanically.
The scissor parts have grease nipples. By greasing the nipples, the lift operates smoothly, and normal wear is prevented. The air connection comes with a pressure regulator with a pre-filter and an oil lubricator.
The TyreON TSC3000X2i double in floor scissor car lift - Extensions at drive on side
Technical details - in floor scissor lift        
Lifting capacity 3000 kg    
Maximum lifting height (gross) 213 cm    
Maximum lifting height (net) 180 cm    
Time lifting / lowering 40 / 30 (adjustable) sec    
Length scissorlift - extensions at 1 side 154 - 180 cm  
Width of platforms 55 cm    
Room between platforms 65 - 95 (choice) cm    
Max. distance controller - Left or Right 250 (hose supplied: 350 cm) cm    
         
Other info - in floor scissor lift        
Engine Power 2.2 kW    
Required air pressure 4 - 8 Bar    
Hydraulic working pressure 23 / 230 Mpa / Bar    
Voltage 400V/3Ph  or   230V/1Ph      
Fusing 16 Ampère    
Required depth for installation 33 + 1 cm    
Noise level