Nova Turchi 300/F mašina za pobijanje šipova
Zainteresovani ste za oglas?
1/17
77.000 €
≈ 9.015.000 RSD
Marka:
Turchi
Model:
300/F
Tip:
mašina za pobijanje šipova
Godina proizvodnje:
2024
Neto težina:
4800 kg
Lokacija:
Estonija Kesklinna
Estonija Kesklinna
Datum objavljivanja:
danas
Kataloški broj prodavca:
+380 67 005 0 228
Motor
Marka:
Yanmar 4TNV88
Snaga:
35 kW (47.62 k.s.)
Zapremina:
2190 cm³
Broj cilindra:
4
Stanje
Stanje:
novi
Garancija:
1 godina
Daljinska inspekcija
Isporuka opreme
Dodatne informacije
Boja:
narandžasti
Važno
Ova ponuda је informativnog karaktera. Za više detalja, pitajte prodavca.
Saveti za kupovinu
Kontakti prodavca
Aleanda
Estonija
3 godine na Machineryline
4.5
45 komentara
+380 67 005...
Prikaži
+380 67 005 0228
+40 729 49...
Prikaži
+40 729 497 070
Prodajete tehniku?
Učinite to sa nama!
Slični oglasi
77.000 €
RSD
≈ 9.015.000 RSD
Godina
2024
Kilometraža
1 m/č
Snaga
Nemačka, Berlin
77.000 €
RSD
≈ 9.015.000 RSD
Godina
2024
Kilometraža
Snaga
Rumunija, Buharest
77.000 €
RSD
≈ 9.015.000 RSD
Dubina kopanja
4.4 m
4.4 m
Godina
2024
Kilometraža
2 m/č
Snaga
Ukrajina, Chernivtsi
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad
Weight kg 4500
Dimensions closed machine with lifted column: Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide)
Movements hydraulic 1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
Power Oil sets on the machine 180 BAR
Hydraulic system to open cicuit
Hydraulic pump at gear
Capacity oil tank 140 LT
Translation's speed of machine 1,92 3,33 KM/H
Engagement in HP 47,3
Maximum highest post 4.400 mm
HAMMER
Impact power 950/1200 JOULE
Impact rate 620÷1.500/570÷1180
Weight 350kg/450 kg
Oil flow rate 60÷90 LT.-MIN./ 70÷100 LT.-MIN
Power oil sets on the hammer 170 BAR
ENGINE YANMAR 4TNV88:
n° cylinder 4
Swept volume 2.190 CM3
Power at 3.000 RPM 34,4 KW
Power at 2.600 RPM 31,3 KW
Air cooled completed with starting
filter Electric and dry
ACCESSORIES INCLUDED WITH MACHINE - Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm
ACCESSORIES ON REQUEST - Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad