MAN V12-2000 motor za MAN D2862 LE496
Hörsching7279 km to "United States/Columbus"
Ako odlučite da kupite opremu po niskoj ceni, proverite da li komunicirate sa pravim prodavcem. Saznajte više o vlasniku opreme. Jedan od načina prevare je da se predstavi kao prava kompanija. U slučaju sumnje, obavestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Pre nego što odlučite da napravite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumeli prosečnu vrednost izabranog modela opreme. Ako je cena ponude koja vam se sviđa mnogo niža od sličnih ponuda, razmotrite je. Značajna razlika u ceni može ukazati na skrivene nedostatke ili pokušaj prodavca da izvrši prevaru.
Ne kupujte proizvode čija je cena suviše različita od prosečne cene slične opreme.
Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unapred. U slučaju sumnje, ne bojte se da pojasnite detalje, tražite dodatne fotografije i dokumente za opremu, proverite autentičnost dokumenata i postavjate pitanja.
Najčešća vrsta prevare. Nepošteni prodavci mogu zatražiti određenu količinu kapare da "rezervišu" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sakupiti veliki iznos i nestanu, i više se ne pojave.
- Prenos pretplate na karticu
- Nemojte plaćati unapred bez izdavanja dokumenata koji potvrđuju postupak prenosa novca, ako je vam tokom komunikacije prodavac postao sumnjičav.
- Prenos na račun "poverenika"
- Takav zahtev treba biti alarmantan, najverovatnije komunicirate sa prevarantom.
- Prenos na račun kompanije sa sličnim nazivom
- Budite oprezni, prevaranti se mogu sakriti iza poznatih kompanija, neznatno menjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
- Zamena sopstvenih podataka u fakturi stvarne kompanije
- Pre prenosa proverite da li su navedeni podaci tačni i da se odnose na navedenu kompaniju.
Kontakti prodavca
+358 50 53...
Prikaži
+358 50 5345498
+358 9 231...
Prikaži
+358 9 23165797
Austrija 
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Austrija, Hörsching
Francuska, Rouillac
Austrija, Hörsching
Finska, Helsinki
Velika Britanija, Dudley
Velika Britanija, Dudley
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG