Nova MEP Vollautomat SHARK 332-1 NC 5.0 MDE trakasta testera za metal
Ahaus6623 km to "United States/Columbus"
Ako odlučite da kupite opremu po niskoj ceni, proverite da li komunicirate sa pravim prodavcem. Saznajte više o vlasniku opreme. Jedan od načina prevare je da se predstavi kao prava kompanija. U slučaju sumnje, obavestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Pre nego što odlučite da napravite kupovinu, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumeli prosečnu vrednost izabranog modela opreme. Ako je cena ponude koja vam se sviđa mnogo niža od sličnih ponuda, razmotrite je. Značajna razlika u ceni može ukazati na skrivene nedostatke ili pokušaj prodavca da izvrši prevaru.
Ne kupujte proizvode čija je cena suviše različita od prosečne cene slične opreme.
Ne dajte saglasnost na sumnjive zaloge i plaćanje robe unapred. U slučaju sumnje, ne bojte se da pojasnite detalje, tražite dodatne fotografije i dokumente za opremu, proverite autentičnost dokumenata i postavjate pitanja.
Najčešća vrsta prevare. Nepošteni prodavci mogu zatražiti određenu količinu kapare da "rezervišu" vaše pravo na kupovinu opreme. Dakle, prevaranti mogu sakupiti veliki iznos i nestanu, i više se ne pojave.
- Prenos pretplate na karticu
- Nemojte plaćati unapred bez izdavanja dokumenata koji potvrđuju postupak prenosa novca, ako je vam tokom komunikacije prodavac postao sumnjičav.
- Prenos na račun "poverenika"
- Takav zahtev treba biti alarmantan, najverovatnije komunicirate sa prevarantom.
- Prenos na račun kompanije sa sličnim nazivom
- Budite oprezni, prevaranti se mogu sakriti iza poznatih kompanija, neznatno menjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv kompanije sumnjiv.
- Zamena sopstvenih podataka u fakturi stvarne kompanije
- Pre prenosa proverite da li su navedeni podaci tačni i da se odnose na navedenu kompaniju.
Kontakti prodavca
+49 2561 9...
Prikaži
+49 2561 938471
+49 2561 9...
Prikaži
+49 2561 938436
Nemačka 
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Ahaus
Nemačka, Niederlangen
Nemačka, Niederlangen
Schnittbereich bei 90 Grad: flach 330 x 260 mm
Schnittbereich bei 90 Grad: vierkant 260 x 260 mm
Schnittbereich bei 45 Grad: rund 260 mm
Schnittbereich bei 45 Grad: flach 270 x 200 mm
Schnittbereich bei 60 Grad: rund 180 mm
Schnittbereich bei 60 Grad: flach 170 x 170 mm
Vorschub min/max 50.000 mm
Bandgeschwindigkeit 15 - 100 m/min
Vorschub automatisch 600 mm
Gesamtleistungsbedarf 2,2 kW
Gewicht 1.105 kg
Abmessung L-B-H 3,3 x 2,83 x 2,23 m
capacity 90 degrees: flat 330 x 260 mm
capacity 90 degrees: square 260 x 260 mm
capacity 45 degrees: round 260 mm
capacity 45 degrees: flat 270 x 200 mm
capacity 60 degrees: round 180 mm
capacity 60 degrees: flat 170 x 170 mm
height of material-table 600 mm
Pitch min/max 50.000 mm
vice 335 mm Öffnung
band speed 15 - 100 m/min
automatic feeds 600 mm
dimensions of saw-band 3650 x 27 x 0,9 mm
total power requirement 2,2 kW
weight 1.105 kg
range L-W-H 3,3 x 2,83 x 2,23 m
Electro-hydraulic fully automatic band saw, with additional:
* semi-automatic
* semi-automatic dynamic
* manual operation
Description :
- Automatic cycle (cuts from 0 ° to 60 ° left)
- Semi-automatic, semi-automatic-dynamic and manual cycle
- Cuts from 45 ° right to 60 ° left
- Manual or semi-automatic dynamic cycle
- to make cuts without programming
- Numerically controlled band saw machines
- with the new, specially developed by MEP for automatic machines
Windows CE based control
- User interface with 7 touch screen display and mechanical buttons for
the operational functions of the sawing machine, guarantees reliable
peration, simple and intuitive, and real-time control of all cutting
parameters.
- Protective housing for the safety of the worker
- The control console on a swivel arm allows a comfortable and
safe operation from any position
- Display and entry of alarm and error messages with the option of
report the incidents that have occurred.
- Stepless regulation of the cutting speed from 15 to 100 m / min
Frequency converter (inverter).
- The latest generation of hydraulic power packs, extremely powerful with little
Power consumption.
- Material feed with stepper motor via ball screw, which on
opposite ball bearing is mounted; Single stroke 600 mm repeatable to
saw any length.
- Positioning of the saw head and movement of the feeder using the joystick.
- Automatic detection of the cutting start position
- Manually operated strap tension control with indication on the
display by means of electronic converter
- Automatic monitoring of the cutting load through a directly on the
Cylinder mounted servo valve
- The coolant pan (provided with 2 electric pumps for lubrication and
Cooling of the saw band) is built into the underframe
- The chip drawer can be replaced by a motorized chip conveyor
- see special accessories
- Preparation for the installation of the OPTIONAL minimum quantity
lubrication system together with the conventional standard lubrication
with emulsion oil.
- Chip removal brush
- Bimetal saw band for solid and profile material
- Tools and instructions for use with a list of spare parts
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.